Urgent Require Electrical Design Engineer in Saudi Arabia.

Job Title:      Electrical Design Engineer

Job ID:           CHEV-012
Qualification:     BSc Electrical Engineering
Experience:       10 - 25 Years
City
Country:            Saudi Arabia
DESIRED PROFILE

Job Title: Electrical Design Engineer

Job Brief Description

Candidate must have strong knowledge of electrical design, international codes / standards, technical requisitions preparation, and equipment / material inspection experience. He will be responsible for designing complete electrical and cathodic protection systems in petrochemical plant including performing of electrical sizing & protection calculations and ETAP studies.  He shall have strong knowledge in computer aided design software such as Micro-station and AutoCAD. He shall be capable of reading engineering drawings, standards, specifications and codes. Other duties will also include special tasks such as investigations of failures, provide technical consultation, work as a team member, training colleagues, etc.  Minimum qualifications are a Bachelor of Science degree in electrical engineering from accredited university and at least 12 years of experience with engineering firms or with design offices.  Position will be in engineering and design office of a major petrochemical company (Saudi Chevron Phillips – S-Chem) in Jubail, Saudi Arabia.

Job Responsibilities

Job responsibilities include but not limited to preparing, checking, reviewing, modifying and approving of the following;

? Electrical designs and engineering.

? Compliance with Company specifications.

? Developing scope of works and technical requisitions for materials and services.

? Man-Hour estimation, Material take off and cost estimates of projects.

? Design and engineering calculations for sizing and protection.

? Design and specify equipment such as; low and medium voltage systems, including switchgears, transformers, MCC’s, motors, power factor correction, battery chargers, UPS, cables, protection system selection / sizing / setting, cathodic protection, lighting, grounding, lightening, area classification etc.

? Defining QA requirements and developing QC’s.

? Company specifications and standards.

? Modeling and studies of electrical system using ETAP.

? Evaluating bides technical proposals and recommend.

Other job responsibilities include the followings duties;

• Capable of efficiently using software such as CAD or Micro-Stations to draw his own designs directly on in the system.  He should be also capable of doing the work manually.

• Utilize draft men, CAD Operators to transform his designs into electronic drawings systems such as Micro-station, Auto-Cad, or other software.  He shall be capable of efficiently assigning tasks to these individuals and check their work after completion.

• Candidate must be capable of planning, prioritizing, and organizing his work activities to achieve department objectives.

• Apply experience, engineering techniques, codes, standards, analysis calculations, specification, company procedures, sound judgment, and design criteria to conduct his work.

• Candidate shall be capable of collecting and searching for documents and drawings to do his work.  He shall be capable of reading single line diagrams, connection lists, logic diagrams, layouts, underground drawings and any other types of drawings/documents needed to do the work.

• Ensure that all electrical works done at company are per approved specifications. 

• Prepare quality assurance and control documents.

• Ensures designs are safe, sound, per approved standards, reliable, construct-able, conveniently operable and done in economical manner.

• Field inspection of work activities, reading, monitoring, surveying and measurement of quantities.

• Act as project engineer or lead engineer for electrical related projects/jobs.

• Work directly with project engineers, designers, CAD operators, and draft men to ensure work activities are coordinated.  He may also be required to supervise and train these personnel.

• Calculations and preparation of design packages.

• Review vendor / contractor proposals and documents and shop drawings.

• Responsible to plan and conduct independent work requiring judgment in the evaluation, selection, application and adaptation of engineering techniques, procedures and criteria.

• Devise new approaches to problems, and prepare or modify drawings, specifications, calculations, charts and graphs, and monitor work for compliance to applicable codes, accepted engineering practices 

Qualification

• Bachelor of Science degree in Electrical Engineering (BS) from an accredited university.

• Minimum of 12 years of design experience with engineering firms or with design offices and have hands on experience satisfying the Job Responsibility Requirement.

• Very experienced in ETAP software.

• Very conversant in NEC, NFPA, ANSI, NEMA, IEC. 

• Experienced in Micro-Station and Auto-Cad.

• Knowledge of international and industry standards and codes.

• Very experienced in Microsoft suite of applications.

• Capable of writing narrative scopes of works.

• Able to drive a car with valid driving license. Apply